{"title":"Featured Products","description":"\u003cp\u003eshow on homepage\u003c\/p\u003e","products":[{"product_id":"sgr15-rail-100mm-section","title":"SGR15 Rail - Metal Rod Variant - 100mm Section","description":"\u003cp\u003eThis product is a 3D Printed Version of the SGR15 Rail with metal rods added for strength.  Filament used for this part is Bambu Lab PETG-CF, which is carbon fiber reinforced PETG, and it is printed at 100% infill for maximum strength and rigidity.  \u003cspan\u003eNo. 2 Square drive \u003c\/span\u003e#10x1\"\u003cspan\u003e wood screws are included (1\/4\" of the screw length will be taken up by the rail, so that leaves 3\/4\" to screw into your desk).  Drill a pilot hole with a 3\/32\" bit before installing each screw to avoid splitting the wood.  \u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eChoose the amount of 100mm sections you need and this will be printed as one long piece of rail (\u003c\/span\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cem\u003efor example, a 1500mm rail would require 15 of these 100mm sections\u003c\/em\u003e\u003c\/span\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e).  Be sure to \u003c\/span\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003esend a note with your order to let us know if you need it made as 2 or more separate rails instead of 1 long rail piece.  \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe SGR15 Rail is normally only available for purchase from sellers in China made from aluminum, so this 3D printed version was created as a way to provide an equivalent product domestically to buyers in the United States at a comparable price with much faster delivery.  \u003c\/p\u003e\n\u003cp\u003eOnly Black color option is available at this time, but we plan to offer all Bambu Lab PETG-CF filament color options in the future.\u003c\/p\u003e\n\u003cp\u003eThe last 2 pictures show the rail sections assembled with 6mm diameter metal rods inserted.  \u003cspan style=\"color: rgb(56, 183, 73);\"\u003e\u003cstrong\u003eMetal rods cut to length are now included, so the price has been updated to reflect that.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Dark Matter Mounts","offers":[{"title":"Black","offer_id":45968789995683,"sku":"","price":11.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/2164\/9571\/files\/2_020eb59e-3c65-4dd3-9fee-6772a6de03a5.png?v=1762821723"},{"product_id":"sgr15-rail-plastic-rod-variant-100mm-section","title":"SGR15 Rail - Plastic Rod Variant - 100mm Section","description":"\u003cp\u003eThis product is a 3D Printed Version of the SGR15 Rail with 3D Printed Rods for cost savings.  Filament used for this part is Bambu Lab PETG-CF, which is carbon fiber reinforced PETG, and it is printed at 100% infill for maximum strength and rigidity.  \u003cspan\u003eNo. 2 Square drive \u003c\/span\u003e#10x1\"\u003cspan\u003e wood screws are included (1\/4\" of the screw length will be taken up by the rail, so that leaves 3\/4\" to screw into your desk).  Mark and drill pilot holes with a 3\/32\" bit before screwing the rail into your desk to avoid splitting the wood.  \u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eChoose the amount of 100mm sections you need and this will be printed as one long piece of rail (\u003cem\u003efor example, a 1500mm rail would require 15 of these 100mm sections\u003c\/em\u003e).  Be sure to \u003c\/span\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003esend a note with your order to let us know if you need it made as 2 or more separate rails instead of 1 piece.  \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe SGR15 Rail is normally only available for purchase from sellers in China made from aluminum, so this 3D printed version was created as a way to provide an equivalent product domestically to buyers in the United States at a comparable price with much faster delivery.  \u003c\/p\u003e\n\u003cp\u003eOnly Black color option is available at this time, but we plan to offer all Bambu Lab PETG-CF filament color options in the future.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eDue to this product using plastic rods for cost savings, it is not recommended for users with extensive builds beyond a simple HOTAS or HOSAS setup.  Pictures show 2 x 100mm sections of rail printed as a single 200mm piece.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Dark Matter Mounts","offers":[{"title":"Black","offer_id":46032750477475,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/2164\/9571\/files\/3DPrintedRail-200mmSection-plasticrods-top.jpg?v=1752834446"},{"product_id":"120mm-pc-fan-spacer-38mm-thick","title":"120mm PC Fan Spacer - 38mm Thick","description":"\u003cp\u003eThis product is a 3D Printed 120mm Fan Spacer with a thickness of 38mm.  Please send a message if a spacer of different size is needed and one can be created for you. \u003c\/p\u003e\n\u003cp\u003eFilament used for this part is Bambu Lab PETG-CF, which is carbon fiber reinforced PETG, and it is printed at 100% infill for maximum strength and rigidity.  \u003cspan\u003eAnti-vibration\u003c\/span\u003e feet on both sides of the spacer are printed in clear NinjaFlex TPE.  Mounting hardware is not provided as length of screws will vary depending on your specific use case.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eOnly Black color option is available at this time, but we plan to offer all Bambu Lab PETG-CF filament color options in the future.\u003c\/em\u003e\u003c\/p\u003e","brand":"Dark Matter Mounts","offers":[{"title":"Black","offer_id":46370018230435,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/2164\/9571\/files\/white-Photoroom_b7aadcfe-8b79-47bb-9c4b-9045cdf71749.png?v=1760545197"},{"product_id":"sgr15-rail-end-stop","title":"SGR15 Rail - End Stop","description":"\u003cp\u003eThis product is a 3D Printed End Stop for SGR15 Rails - it will work with any variant of the SGR15 rail (all aluminum rail, 3D printed rail with metal rods and 3D printed rail with plastic rods).  Filament used for this part is Bambu Lab PETG-CF, which is carbon fiber reinforced PETG, and it is printed at 100% infill for maximum strength and rigidity.  \u003cspan\u003eNo. 2 Square drive \u003c\/span\u003e#10x1\"\u003cspan\u003e wood screws are included (1\/4\" of the screw length will be taken up by the rail, so that leaves 3\/4\" to screw into your desk).  Mark and drill pilot holes with a 3\/32\" bit before screwing the rail into your desk to avoid splitting the wood.  \u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eYou'll need 1 of these for each end of the rail if stops are desired on both sides\u003c\/span\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e.  \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTo our best knowledge, this product is not currently produced anywhere else in the world.\u003c\/p\u003e\n\u003cp\u003eOnly Black color option is available at this time, but we plan to offer all Bambu Lab PETG-CF filament color options in the future.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eRails and Mounts pictured are not included with this purchase, but can be purchased separately.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Dark Matter Mounts","offers":[{"title":"Black","offer_id":46502496600227,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/2164\/9571\/files\/4_8bb45745-40a7-4907-8f5a-af6825a41af4.png?v=1764626299"},{"product_id":"sgr15-rail-adjustable-stop","title":"SGR15 Rail - Adjustable Stop","description":"\u003cp\u003eThis product is a 3D Printed Adjustable Stop for SGR15 Rails - it will work with any variant of the SGR15 rail (all aluminum rail, 3D printed rail with metal rods and 3D printed rail with plastic rods).  Filament used for this part is Bambu Lab PETG-CF, which is carbon fiber reinforced PETG, and it is printed at 100% infill for maximum strength and rigidity.  All necessary hardware is included (M4 screw and nut) - you will need a 3mm hex key to lock\/unlock the stop to adjust it's position on the rail.  \u003c\/p\u003e\n\u003cp\u003eTo our best knowledge, this product is not currently produced anywhere else in the world.\u003c\/p\u003e\n\u003cp\u003eOnly Black color option is available at this time, but we plan to offer all Bambu Lab PETG-CF filament color options in the future.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eRails and Mounts pictured are not included with this purchase, but can be purchased separately.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Dark Matter Mounts","offers":[{"title":"Black","offer_id":46591465554083,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/2164\/9571\/files\/1_95492add-c9ed-47a1-9704-f85868ba2527.png?v=1764628065"},{"product_id":"stream-deck-classic-adapter-for-accessory-arm","title":"Stream Deck Classic adapter for Accessory Arm","description":"\u003cp\u003eThis product is a 3D Printed Adapter for mounting an Elgato Stream Deck Classic (original Stream Deck) onto your preferred extrusion size.  Filament used for this part is Bambu Lab PETG-CF, which is carbon fiber reinforced PETG, and it is printed at 100% infill for maximum strength and rigidity.  All mounting hardware comes with the Accessory Mounting Arm, which is sold separately - choose the arm that matches your extrusion size.  \u003c\/p\u003e\n\u003cp\u003eThere are a lot of 3D models on the internet for Stream Deck Mounts, but this one has been tested and optimized for mounting vertically on extrusion to sit right at desktop height - works well with both desk clamp and desk rail mounts.  \u003c\/p\u003e\n\u003cp\u003eOnly Black color option is available at this time, but we plan to offer all Bambu Lab PETG-CF filament color options in the future.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eBe sure to also purchase a matching Accessory Mounting Arm to connect this Stream Deck Mount to your preferred Extrusion size.  Please see the last 3 photos for an example of how the Stream Deck Mount connects to the Accessory Mounting Arm (Accessory Mounting Arm sold separately).\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"Dark Matter Mounts","offers":[{"title":"Black","offer_id":46732831686819,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/2164\/9571\/files\/IMG_0810.jpg?v=1741325550"},{"product_id":"adapter-plate-imperial-1020-extrusion-to-sgr15-rail-guide","title":"Adapter Plate - Imperial 1020 Extrusion to SGR15 Rail Guide","description":"\u003cp\u003eThis product is a 3D Printed Adapter for mounting an SGR15 Rail Guide onto Imperial 1020 Extrusion for use with an SGR15 rail.  Filament used for this part is Bambu Lab PETG-CF, which is carbon fiber reinforced PETG, and it is printed at 100% infill for maximum strength and rigidity.  All mounting hardware is included with the adapter.\u003c\/p\u003e\n\u003cp\u003eTo our best knowledge, this product is not currently produced anywhere else in the world.\u003c\/p\u003e\n\u003cp\u003eOnly Black color option is available at this time, but we plan to offer all Bambu Lab PETG-CF filament color options in the future.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eBe sure to also purchase an SGR15 Rail Guide and use this adapter to connect it to your Imperial 1020 Extrusion.  If you have purchased Foxx Mounts or Predator Mounts, this is the correct size adapter for the extrusion they use.  Please see the last 2 photos for an example of how the adapter plate works (SGR15 Rail Guide and 1020 Extrusion are not included but are available for purchase separately).\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"Dark Matter Mounts","offers":[{"title":"Black","offer_id":46732875104419,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/2164\/9571\/files\/1_1a0efe07-95d6-4e41-b0af-a8c3bf95f61c.png?v=1762820865"},{"product_id":"adapter-plate-metric-2060-extrusion-to-sgr15-rail-guide","title":"Adapter Plate - Metric 2060 Extrusion to SGR15 Rail Guide","description":"\u003cp\u003eThis product is a 3D Printed Adapter for mounting an SGR15 Rail Guide onto Metric 2060 Extrusion for use with an SGR15 rail.  Filament used for this part is Bambu Lab PETG-CF, which is carbon fiber reinforced PETG, and it is printed at 100% infill for maximum strength and rigidity.  All mounting hardware is included with the adapter.\u003c\/p\u003e\n\u003cp\u003eTo our best knowledge, this product is not currently produced anywhere else in the world.\u003c\/p\u003e\n\u003cp\u003eOnly Black color option is available at this time, but we plan to offer all Bambu Lab PETG-CF filament color options in the future.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eBe sure to also purchase an SGR15 Rail Guide and use this adapter to connect it to your Metric 2060 Extrusion.  If you have purchased Hikig Mounts from Amazon, this is the correct size adapter for the extrusion they use.  Please see the last photo for an example of how the adapter plate works (SGR15 Rail, SGR15 Rail Guide and 2060 Extrusion are not included but are available for purchase separately).\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"Dark Matter Mounts","offers":[{"title":"Black","offer_id":46732882051235,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/2164\/9571\/files\/IMG_0869.jpg?v=1741767448"},{"product_id":"adapter-plate-metric-4080-extrusion-to-sgr15-rail-guide","title":"Adapter Plate - Metric 4080 Extrusion to SGR15 Rail Guide","description":"\u003cp\u003eThis product is a 3D Printed Adapter for mounting an SGR15 Rail Guide onto Metric 4080 Extrusion for use with an SGR15 rail.  Filament used for this part is Bambu Lab PETG-CF, which is carbon fiber reinforced PETG, and it is printed at 100% infill for maximum strength and rigidity.  All mounting hardware is included with the adapter.\u003c\/p\u003e\n\u003cp\u003eTo our best knowledge, this product is not currently produced anywhere else in the world.\u003c\/p\u003e\n\u003cp\u003eOnly Black color option is available at this time, but we plan to offer all Bambu Lab PETG-CF filament color options in the future.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eBe sure to also purchase an SGR15 Rail Guide and use this adapter to connect it to your Metric 4080 Extrusion.  If you have purchased MonsterTech Mounts, this is the correct size adapter for the extrusion they use.  \u003cspan style=\"color: rgb(255, 0, 0);\"\u003eIf you are using our 4080 DMM Extrusion, no adapter plate is necessary, as the hole pattern is the same between the SGR15 Rail Guide and Top Plate on the Mount.\u003c\/span\u003e  Please see the last 5 photos for an example of how the adapter plate works (SGR15 Rail, SGR15 Rail Guide and 4080 Extrusion are not included but are available for purchase separately).\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"Dark Matter Mounts","offers":[{"title":"Black","offer_id":46732885917859,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/2164\/9571\/files\/IMG_0864.jpg?v=1741765372"},{"product_id":"adapter-plate-imperial-1020-extrusion-to-metric-4080-mounting-plate","title":"Adapter Plate - Imperial 1020 Extrusion to Metric 4080 Mounting plate","description":"\u003cp\u003eThis product is a 3D Printed Adapter for mounting a MonsterTech Keyboard Tray onto Imperial 1020 Extrusion.  Filament used for this part is Bambu Lab PETG-CF, which is carbon fiber reinforced PETG, and it is printed at 100% infill for maximum strength and rigidity.  All mounting hardware is included with the adapter.\u003c\/p\u003e\n\u003cp\u003eTo our best knowledge, this product is not currently produced anywhere else in the world.\u003c\/p\u003e\n\u003cp\u003eOnly Black color option is available at this time, but we plan to offer all Bambu Lab PETG-CF filament color options in the future.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 0, 0);\"\u003eBe sure to also purchase a Keyboard Tray from MonsterTech (you will NOT need their mounting hardware or extrusion) and use this adapter to connect it to your Imperial 1020 Extrusion.\u003c\/span\u003e  If you have purchased Foxx Mounts or Predator Mounts, this is the correct size adapter for the extrusion they use.  Please see the last 3 photos for an example of how the adapter plate works (SGR15 Rail, SGR15 Rail Guide, SGR15 Rail Guide Adapter Plate and 1020 Extrusion are not included, but are available for purchase separately).\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"Dark Matter Mounts","offers":[{"title":"Black","offer_id":46732895912099,"sku":null,"price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/2164\/9571\/files\/IMG_0870.jpg?v=1741904904"},{"product_id":"accessory-mounting-arm-for-imperial-1020-extrusion","title":"Accessory Mounting Arm for Imperial 1020 Extrusion","description":"\u003cp\u003eThis product is a 3D Printed Adapter for mounting Accessories \u003cstrong\u003e\u003cspan style=\"text-decoration: underline; color: rgb(72, 41, 225);\"\u003eVertically\u003c\/span\u003e\u003c\/strong\u003e\u003cem\u003e \u003c\/em\u003eonto Imperial 1020 Extrusion.  Filament used for this part is Bambu Lab PETG-CF, which is carbon fiber reinforced PETG, and it is printed at 100% infill for maximum strength and rigidity.  All mounting hardware is included with the adapter.\u003c\/p\u003e\n\u003cp\u003eThere are a lot of 3D models on the internet for Accessory Mounting on Extrusion, but this one has been tested and optimized for mounting vertically on extrusion to sit right at desktop height - works well with both desk clamp and desk rail mounts.  \u003c\/p\u003e\n\u003cp\u003eOnly Black color option is available at this time, but we plan to offer all Bambu Lab PETG-CF filament color options in the future.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eBe sure to also purchase an accessory mount (for example: Stream Deck Classic Mount) to connect to your Accessory Mounting Arm - all accessory mounts we sell are compatible with this arm.  If you have purchased Foxx Mounts or Predator Mounts, this is the correct size adapter for the extrusion they use.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"Dark Matter Mounts","offers":[{"title":"Black","offer_id":46732906823843,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/2164\/9571\/files\/IMG_0814.jpg?v=1741326218"},{"product_id":"mounting-plate-vkb-stecs-mini-plus-for-imperial-1020-extrusion","title":"Mounting Plate - VKB STECS Mini+ (Plus) for Imperial 1020 Extrusion","description":"\u003cp\u003eThis product is a 3D Printed Mounting Plate for attaching a VKB STECS Mini+ Throttle to Imperial 1020 Extrusion.  Filament used for this part is Bambu Lab PETG-CF, which is carbon fiber reinforced PETG, and it is printed at 100% infill for maximum strength and rigidity.  1\/4-20 screws and spring nuts are provided for attaching this mounting plate to your extrusion.  M5 screws and square nuts are also provided for attaching your throttle to the mounting plate.\u003c\/p\u003e\n\u003cp\u003eOnly Black color option is available at this time, but we plan to offer all Bambu Lab PETG-CF filament color options in the future.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eIf you have purchased Foxx Mounts or Predator Mounts, the mounting holes on this product are compatible with their extrusion.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"Dark Matter Mounts","offers":[{"title":"Black","offer_id":46732958662819,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/2164\/9571\/files\/RENDERTOP-Imperial1020-MountingPlate-VKBSTECSMiniPlus.png?v=1758657701"},{"product_id":"mounting-plate-vkb-gladiator-nxt-evo-for-metric-4080-extrusion","title":"Mounting Plate - VKB Gladiator NXT\/EVO for Metric 4080 Extrusion","description":"\u003cp\u003eThis product is a 3D Printed Mounting Plate for attaching VKB Gladiator NXT\/EVO Device to Metric 4080 Extrusion.  Filament used for this part is Bambu Lab PETG-CF, which is carbon fiber reinforced PETG, and it is printed at 100% infill for maximum strength and rigidity.  M6 screws and hammer head T-nuts are provided for attaching this mounting plate to your extrusion.  M5 screws and nuts are provided for attaching your VKB Gladiator NXT\/EVO Device to the mounting plate\u003c\/p\u003e\n\u003cp\u003eOnly Black color option is available at this time, but we plan to offer all Bambu Lab PETG-CF filament color options in the future.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eIf you have purchased Dark Matter Mounts or Monster Tech mounts, the mounting holes on this product are compatible with their extrusion.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"Dark Matter Mounts","offers":[{"title":"Black","offer_id":46732962234531,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/2164\/9571\/files\/Metric4080-MountingPlate-VKBGladiatorNXT_EVO-front.png?v=1750813411"},{"product_id":"mounting-plate-vpc-vmax-prime-throttle-for-imperial-1020-extrusion","title":"Mounting Plate - VPC VMAX Prime Throttle for Imperial 1020 Extrusion","description":"\u003cp\u003eThis product is a 3D Printed Mounting Plate for attaching a VPC VMAX Prime Throttle to Imperial 1020 Extrusion.  Filament used for this part is Bambu Lab PETG-CF, which is carbon fiber reinforced PETG, and it is printed at 100% infill for maximum strength and rigidity.  1\/4-20 screws and spring nuts are provided for attaching this mounting plate to your extrusion.  M5 screws and square nuts are also provided for attaching your throttle to the mounting plate.\u003c\/p\u003e\n\u003cp\u003eTo our best knowledge, this product is not currently produced anywhere else in the world.\u003c\/p\u003e\n\u003cp\u003eOnly Black color option is available at this time, but we plan to offer all Bambu Lab PETG-CF filament color options in the future.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eIf you have purchased Foxx Mounts or Predator Mounts, the mounting holes on this product are compatible with their extrusion.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"Dark Matter Mounts","offers":[{"title":"Black","offer_id":46732970950819,"sku":null,"price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/2164\/9571\/files\/Imperial_1020_-_Mounting_Plate_-_VPC_VMAX_Prime_Throttle_-_front.jpg?v=1752529742"},{"product_id":"mounting-plate-vkb-gnx-thq-for-imperial-1020-extrusion","title":"Mounting Plate - VKB GNX THQ for Imperial 1020 Extrusion","description":"\u003cp\u003eThis product is a 3D Printed Mounting Plate for attaching VKB GNX Devices to Imperial 1020 Extrusion.  Filament used for this part is Bambu Lab PETG-CF, which is carbon fiber reinforced PETG, and it is printed at 100% infill for maximum strength and rigidity.  1\/4-20 screws and spring nuts are provided for attaching this mounting plate to your extrusion.\u003c\/p\u003e\n\u003cp\u003eTo our best knowledge, this product is not currently produced anywhere else in the world.\u003c\/p\u003e\n\u003cp\u003eOnly Black color option is available at this time, but we plan to offer all Bambu Lab PETG-CF filament color options in the future.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 0, 0);\"\u003eBe sure to also purchase M3 or M4 button head screws in the length required for attaching your VKB GNX device to this mounting plate - these screws are not provided by us as there are many device mounting options requiring different screw lengths.\u003c\/span\u003e  \u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eIf you have purchased Foxx Mounts or Predator Mounts, the mounting holes on this product are compatible with their extrusion.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"Dark Matter Mounts","offers":[{"title":"Black","offer_id":46732971868323,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/2164\/9571\/files\/Imperial1020-MountingPlate-VKBGNXTHQ-front.jpg?v=1749238344"},{"product_id":"desk-mount-metric-4080-extrusion-folds-back-rail-mount-only","title":"Desk Mount - Metric 4080 Extrusion - Folds Back (rail mount only)","description":"\u003cp\u003eThis product is a 3D printed desk mount with 180° Folding Metric 4080 Extrusion (compatible with desk rail mounting only).  This is very useful for wide mounts like a Mousepad\/Keyboard Tray because with it folded back you can push multiple Rail Mounts much closer together off to one side when not in-use.  Filament used for this part is Bambu Lab PETG-CF, which is carbon fiber reinforced PETG, and it is printed at 100% infill for maximum strength and rigidity.  The white parts are made with Igus I150 filament to help reduce wear between moving components.  This kit includes 1 top plate 18mm thick, 2 vertical 138mm extrusion pieces (hinged between them), 1 horizontal 206mm extrusion piece with countersunk anchor holes (Keyboard\/Mouse Tray, Joystick, Throttle, etc.) and Horizontal Extrusion Sled for vertical height adjustment.  All assembly hardware is included with this kit (M6 screws\/t-nuts and M8 anchors\/screws\/t-nuts\/clamp lever).  \u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eRail Guide and Mousepad Tray (shown in pictures) are sold separately.  \u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eOnly Black color option is available at this time, but we plan to offer all Bambu Lab PETG-CF filament color options in the future.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eIf you have purchased Dark Matter Mounts or Monster Tech accessories, this is the correct size extrusion to match your parts.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Dark Matter Mounts","offers":[{"title":"Black","offer_id":46732978782371,"sku":null,"price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/2164\/9571\/files\/white-Photoroom.png?v=1760212314"},{"product_id":"desk-mount-metric-4080-extrusion","title":"Desk Mount - Metric 4080 Extrusion","description":"\u003cp\u003eThis product is 3D printed Metric 4080 Extrusion for desk mounts (compatible with desk clamp and desk rail attachments).  Filament used for this part is Bambu Lab PETG-CF, which is carbon fiber reinforced PETG, and it is printed at 100% infill for maximum strength and rigidity.  This kit includes 1 top plate 18mm thick (0.71\"), 1 vertical 192mm (7.56\") extrusion piece, 1 horizontal 210mm (8.27\") extrusion piece with countersunk anchor holes for the horizontal accessory mount (Keyboard\/Mouse Tray, Joystick, Throttle, etc.) and 1 double hole L-bracket for additional strength.  All assembly hardware is included with this kit (M6 screws\/t-nuts and M8 anchors\/screws\/t-nuts).  \u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eDesk clamp and Rail Guide (shown in pictures) attachments for this extrusion are sold separately based on your desk mounting preference.  \u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eOnly Black color option is available at this time, but we plan to offer all Bambu Lab PETG-CF filament color options in the future.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eIf you have purchased Dark Matter Mounts or Monster Tech accessories, this is the correct size extrusion to match your parts.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Dark Matter Mounts","offers":[{"title":"Black","offer_id":46732986941603,"sku":null,"price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/2164\/9571\/files\/Metric4080Extrusion-3DPrinted-DeskMount-top.jpg?v=1750822284"},{"product_id":"desk-mount-imperial-1020-extrusion","title":"Desk Mount - Standard Size - Imperial 1020 Extrusion","description":"\u003cp\u003eThis product is an Imperial 1020 Aluminum Extrusion desk mount (compatible with desk clamp and desk rail attachments).  The kit includes 1 top plate 6mm thick (1\/4\"-20 threaded hole included for Phoenix attachment), 1 vertical 11.5\" extrusion piece and 1 horizontal 7\" extrusion piece (has countersunk anchor holes for attaching to the vertical extrusion).  All assembly hardware is included with this kit (1\/4\"-20 screws\/t-nuts and anchors).  \u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eDesk clamp, Rail Guide and Phoenix attachments (shown in pictures) for this extrusion are sold separately based on your desk mounting preference.  \u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eOnly Black anodized color is available at this time, but we plan to offer silver option in the future.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eIf you have purchased Predator Mounts or Foxx Mount accessories, this is the correct size extrusion to match your parts.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Dark Matter Mounts","offers":[{"title":"Black","offer_id":46733049102499,"sku":null,"price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/2164\/9571\/files\/1-Photoroom.jpg?v=1769247809"},{"product_id":"desk-clamp-kit-for-imperial-1020-extrusion","title":"Desk Clamp Kit - Imperial 1020 Extrusion","description":"\u003cp\u003eThis product is a \u003cstrong\u003eDesk Clamp Kit\u003c\/strong\u003e for \u003cstrong\u003eImperial 1020 Aluminum Extrusion\u003c\/strong\u003e.  The kit includes 1 clamp and all necessary hardware to securely attach it to your Imperial 1020 Extrusion.  \u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eExtrusion kits are sold separately from the mounting kits so that each customer can choose their preferred desk mounting solution.  \u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eIf you have purchased our DMM Imperial 1020 Extrusion, Predator Mounts or Foxx Mounts, this is the correct size kit to match your extrusion.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Dark Matter Mounts","offers":[{"title":"Black","offer_id":46733574701219,"sku":null,"price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/2164\/9571\/files\/clampmountkit-Photoroom.jpg?v=1769248081"},{"product_id":"phoenix-accessory-mount-imperial-1020-extrusion","title":"Phoenix Accessory Mount - Black Powdercoat - Imperial 1020 Extrusion","description":"\u003cp\u003eThis product is metal attachment for mounting accessories to the top plate of your Imperial 1020 Extrusion Desk Mount.  It is made to screw into the 1\/4\"-20 thread hole which is included in the top plate of our DMM Imperial 1020 Extrusion and is also compatible with the latest version of the top plate that was previously sold by Predator Mounts.  \u003c\/p\u003e\n\u003cp\u003eThis accessory mount is made to keep your device sitting at desktop height, just out of the way of your joystick\/throttle range of motion, but still in reach and at a good viewing angle.  It can be rotated horizontally 180\u003cspan\u003e° and pivoted vertically up to 90° and then locked down to keep your device exactly where you want it.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAll mounting hardware is included with the product, \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003ebut accessory adapters to suit your specific devices are sold separately since there are many options\u003c\/strong\u003e\u003c\/span\u003e.  If you don't see an accessory adapter listed for your device, feel free to reach out and request one to be made and added to the store.  \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eIf you are using a Rail solution rather than the Clamp solution for your desk mounts, you will also need to purchase the Pathfinder Kit separately to add back the\u003c\/strong\u003e \u003cstrong\u003eextrusion top plate for the Phoenix to mount to.  \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOnly Black Powdercoat option is available at this time, but we plan to offer a silver option in the future.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eImperial 1020 Extrusion, Stream Deck XL accessory adapter and Stream Deck XL pictured are only to demonstrate how the Phoenix attaches to the mount and how the accessory adapter attaches to the Phoenix.  Only the Phoenix itself included with this purchase.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Dark Matter Mounts","offers":[{"title":"Black","offer_id":47057875468451,"sku":null,"price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/2164\/9571\/files\/1-Photoroom_85f01806-5242-4312-902c-cfae68fb7251.jpg?v=1769254042"},{"product_id":"office-chair-rotation-lock-black-anodized","title":"Office Chair Rotation Lock - Black Anodized","description":"\u003cp\u003eThis product is metal adapter designed to lock your office chair's rotation function by securing the gas lift tube mechanism in place.  This is useful when playing simulator games where the forces exerted on the controls can cause your chair to rotate.  The chair's rotation function can easily be locked and unlocked by way of a clamp lever, which is reachable while seated in the chair by leaning forward.  \u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eCompatible with most office chairs that have a 50mm (1.97\") lower and 28mm (1.10\") upper gas lift tube diameter.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot compatible with chairs where the larger diameter part of the gas lift tube extends to less than 33mm above the wheelbase.  Also, not compatible with chairs using a spiral lift instead of a gas lift system.\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis mechanism\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003elocks chair rotation only\u003c\/strong\u003e, not wheel movement. For locked wheels, use lockable wheels or fixed casters.\u003c\/p\u003e\n\u003cp\u003eInstallation requires removing the upper part of the gas lift from the seat base.  Plastic cover over the gas lift will also need to be removed.  We do not yet sell gas lift removal tools but will have them available soon.\u003c\/p\u003e","brand":"Dark Matter Mounts","offers":[{"title":"Black","offer_id":47065856737443,"sku":null,"price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/2164\/9571\/files\/3-Photoroom_7cfcb21c-ae36-4b42-8c32-6810ad46a54b.jpg?v=1769255988"},{"product_id":"phoenix-adapter-stream-deck-xl","title":"Phoenix Adapter - Stream Deck XL","description":"\u003cp\u003eThis product is 3D printed adapter for attaching a Stream Deck XL (32 key) to our DMM Phoenix Accessory Mount.  It is made to screw into the Phoenix Accessory mount with M4 thumbscrews (thumbscrews are included with the Phoenix Accessory mount since they are the same for all Phoenix adapters) and is also compatible with the latest version of the Phoenix that was previously sold by Predator Mounts.  Filament used for this part is Bambu Lab PETG-CF, which is carbon fiber reinforced PETG, and it is printed at 100% infill for maximum strength and rigidity. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eOnly Black color option is available at this time, but we plan to offer all Bambu Lab PETG-CF filament color options in the future.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eImperial 1020 Extrusion, Phoenix Accessory Mount and Stream Deck XL pictured are only to demonstrate how the Phoenix adapter looks when fully installed.  Only the Phoenix adapter itself is included with this purchase.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Dark Matter Mounts","offers":[{"title":"Black","offer_id":47074749677731,"sku":null,"price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/2164\/9571\/files\/1-Photoroom_999ce71b-398f-49e7-8117-c6a3a0d17f44.jpg?v=1769273116"},{"product_id":"phoenix-adapter-stream-deck-classic","title":"Phoenix Adapter - Stream Deck Classic","description":"\u003cp\u003eThis product is 3D printed adapter for attaching a Stream Deck Classic (15 key) to our DMM Phoenix Accessory Mount.  It is made to screw into the Phoenix Accessory mount with M4 thumbscrews (thumbscrews are included with the Phoenix Accessory mount since they are the same for all Phoenix adapters) and is also compatible with the latest version of the Phoenix that was previously sold by Predator Mounts.  Filament used for this part is Bambu Lab PETG-CF, which is carbon fiber reinforced PETG, and it is printed at 100% infill for maximum strength and rigidity. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eOnly Black color option is available at this time, but we plan to offer all Bambu Lab PETG-CF filament color options in the future.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eImperial 1020 Extrusion, Phoenix Accessory Mount and Stream Deck Classic pictured are only to demonstrate how the Phoenix adapter looks when fully installed.  Only the Phoenix adapter itself is included with this purchase.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Dark Matter Mounts","offers":[{"title":"Black","offer_id":47077656395939,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/2164\/9571\/files\/1-Photoroom_635dc689-a17c-434e-8201-11032ae49d11.jpg?v=1769274245"},{"product_id":"phoenix-adapter-stream-deck-mk-2","title":"Phoenix Adapter - Stream Deck Mk.2","description":"\u003cp\u003eThis product is 3D printed adapter for attaching a Stream Deck Mk.2 (15 key) to our DMM Phoenix Accessory Mount.  It is made to screw into the Phoenix Accessory mount with M4 thumbscrews (thumbscrews are included with the Phoenix Accessory mount since they are the same for all Phoenix adapters) and is also compatible with the latest version of the Phoenix that was previously sold by Predator Mounts.  Filament used for this part is Bambu Lab PETG-CF, which is carbon fiber reinforced PETG, and it is printed at 100% infill for maximum strength and rigidity. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eOnly Black color option is available at this time, but we plan to offer all Bambu Lab PETG-CF filament color options in the future.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eImperial 1020 Extrusion, Phoenix Accessory Mount and Stream Deck Mk.2 pictured are only to demonstrate how the Phoenix adapter looks when fully installed.  Only the Phoenix adapter itself is included with this purchase.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Dark Matter Mounts","offers":[{"title":"Black","offer_id":47078203818147,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/2164\/9571\/files\/1-Photoroom_3acdd955-b40e-4ae2-8002-f282782d440b.jpg?v=1769275507"},{"product_id":"phoenix-adapter-stream-deck-plus","title":"Phoenix Adapter - Stream Deck+ (Plus)","description":"\u003cp\u003eThis product is 3D printed adapter for attaching a Stream Deck+ (8 key, 4 knob, 1 touchscreen) to our DMM Phoenix Accessory Mount.  It is made to screw into the Phoenix Accessory mount with M4 thumbscrews (thumbscrews are included with the Phoenix Accessory mount since they are the same for all Phoenix adapters) and is also compatible with the latest version of the Phoenix that was previously sold by Predator Mounts.  Filament used for this part is Bambu Lab PETG-CF, which is carbon fiber reinforced PETG, and it is printed at 100% infill for maximum strength and rigidity. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eOnly Black color option is available at this time, but we plan to offer all Bambu Lab PETG-CF filament color options in the future.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eImperial 1020 Extrusion, Phoenix Accessory Mount and Stream Deck+ pictured are only to demonstrate how the Phoenix adapter looks when fully installed.  Only the Phoenix adapter itself is included with this purchase.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Dark Matter Mounts","offers":[{"title":"Black","offer_id":47078513049763,"sku":null,"price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/2164\/9571\/files\/1-Photoroom_54cba8cb-0621-4b5d-9c25-e90991b87c06.jpg?v=1769617072"},{"product_id":"phoenix-adapter-tablet-phone","title":"Phoenix Adapter - Tablet\/Phone\/Keyboard","description":"\u003cp\u003eThis product is 3D printed adapter for attaching a Tablet, Phone or a Keyboard to our DMM Phoenix Accessory Mount.  Max height of 135mm and depth of 30mm.  It is made to screw into the Phoenix Accessory mount with M4 thumbscrews (thumbscrews are included with the Phoenix Accessory mount since they are the same for all Phoenix adapters) and is also compatible with the latest version of the Phoenix that was previously sold by Predator Mounts.  Grip tape is included to help lock device in place when clamped down.  Filament used for this part is Bambu Lab PETG-CF, which is carbon fiber reinforced PETG, and it is printed at 100% infill for maximum strength and rigidity. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eOnly Black color option is available at this time, but we plan to offer all Bambu Lab PETG-CF filament color options in the future.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eImperial 1020 Extrusion, Phoenix Accessory Mount, Tablet, Phone and Keyboard pictured are only to demonstrate how the Phoenix adapter looks when fully installed.  Only the Phoenix adapter itself is included with this purchase.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Dark Matter Mounts","offers":[{"title":"Black","offer_id":47087096103075,"sku":null,"price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/2164\/9571\/files\/1-Photoroom_f02a66c5-942b-44d1-bd60-4991149a1f52.jpg?v=1769333881"},{"product_id":"phoenix-adapter-loupedeck-ct","title":"Phoenix Adapter - Loupedeck CT","description":"\u003cp\u003eThis product is 3D printed adapter for attaching a Loupedeck CT to our DMM Phoenix Accessory Mount.  It is made to screw into the Phoenix Accessory mount with M4 thumbscrews (thumbscrews are included with the Phoenix Accessory mount since they are the same for all Phoenix adapters) and is also compatible with the latest version of the Phoenix that was previously sold by Predator Mounts.  Filament used for this part is Bambu Lab PETG-CF, which is carbon fiber reinforced PETG, and it is printed at 100% infill for maximum strength and rigidity. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eOnly Black color option is available at this time, but we plan to offer all Bambu Lab PETG-CF filament color options in the future.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eImperial 1020 Extrusion, Phoenix Accessory Mount and Loupedeck CT pictured are only to demonstrate how the Phoenix adapter looks when fully installed.  Only the Phoenix adapter itself is included with this purchase.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Dark Matter Mounts","offers":[{"title":"Black","offer_id":47087940468899,"sku":null,"price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/2164\/9571\/files\/1-Photoroom_b3fa4878-c1c4-4461-bb4e-eea42f00ac6a.jpg?v=1769383822"},{"product_id":"phoenix-adapter-razer-stream-controller-loupedeck-live","title":"Phoenix Adapter - Razer Stream Controller\/Loupedeck Live","description":"\u003cp\u003eThis product is 3D printed adapter for attaching a Razer Stream Controller\/Loupedeck Live (same product) to our DMM Phoenix Accessory Mount.  It is made to screw into the Phoenix Accessory mount with M4 thumbscrews (thumbscrews are included with the Phoenix Accessory mount since they are the same for all Phoenix adapters) and is also compatible with the latest version of the Phoenix that was previously sold by Predator Mounts.  Filament used for this part is Bambu Lab PETG-CF, which is carbon fiber reinforced PETG, and it is printed at 100% infill for maximum strength and rigidity. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eOnly Black color option is available at this time, but we plan to offer all Bambu Lab PETG-CF filament color options in the future.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eImperial 1020 Extrusion, Phoenix Accessory Mount and Razer Stream Controller pictured are only to demonstrate how the Phoenix adapter looks when fully installed.  Only the Phoenix adapter itself is included with this purchase.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Dark Matter Mounts","offers":[{"title":"Black","offer_id":47088053092515,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/2164\/9571\/files\/1-Photoroom_a33fed1c-e493-4de3-b78a-b572c5e8b67d.jpg?v=1769538167"},{"product_id":"grip-dev-kit-for-novint-falcon","title":"Grip Dev Kit for Novint Falcon","description":"\u003cp\u003eThis item is assorted parts needed to build your own custom grip for the Novint Falcon.  It also includes our take of the pistol grip that Novint used to sell (it re-uses the circuit boards from the knob grip that comes standard with a Falcon).  Circuit boards are not included, you will need to take apart your knob grip and use those boards.\u003cbr\u003e\u003c\/p\u003e\n\u003ctable border=\"0\" cellpadding=\"0\" cellspacing=\"0\" width=\"422\" style=\"border-collapse: collapse; width: 316pt;\" xmlns=\"http:\/\/www.w3.org\/1999\/xhtml\" data-sheets-root=\"1\" data-sheets-baot=\"1\"\u003e\n\u003ccolgroup\u003e\n\u003ccol width=\"279\" style=\"mso-width-source: userset; mso-width-alt: 10203; width: 209pt;\"\u003e \u003ccol width=\"43\" style=\"mso-width-source: userset; mso-width-alt: 1572; width: 32pt;\"\u003e \u003ccol width=\"100\" style=\"mso-width-source: userset; mso-width-alt: 3657; width: 75pt;\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\"\u003e\n\u003ctd height=\"20\" class=\"xl66\" width=\"279\" style=\"height: 15.0pt; width: 209pt; overflow: hidden; padding-bottom: 2px; padding-top: 2px;\"\u003eItem\u003c\/td\u003e\n\u003ctd class=\"xl66\" width=\"43\" style=\"border-left: none; width: 32pt; overflow: hidden; padding-bottom: 2px; padding-top: 2px;\"\u003eqty\u003c\/td\u003e\n\u003ctd class=\"xl66\" width=\"100\" style=\"border-left: none; width: 75pt; overflow: hidden; padding-bottom: 2px; padding-top: 2px;\"\u003eunit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\"\u003e\n\u003ctd height=\"20\" class=\"xl65\" style=\"height: 15.0pt; border-top: none; overflow: hidden; padding-bottom: 2px; padding-top: 2px;\"\u003e30awg solid core wires (6 colors)\u003c\/td\u003e\n\u003ctd class=\"xl65\" align=\"right\" style=\"border-top: none; border-left: none; overflow: hidden; padding-bottom: 2px; padding-top: 2px;\"\u003e4\u003c\/td\u003e\n\u003ctd class=\"xl65\" style=\"border-top: none; border-left: none; overflow: hidden; padding-bottom: 2px; padding-top: 2px;\"\u003eft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\"\u003e\n\u003ctd height=\"20\" class=\"xl65\" style=\"height: 15.0pt; border-top: none; overflow: hidden; padding-bottom: 2px; padding-top: 2px;\"\u003e3D printed pistol grip parts\u003c\/td\u003e\n\u003ctd class=\"xl65\" align=\"right\" style=\"border-top: none; border-left: none; overflow: hidden; padding-bottom: 2px; padding-top: 2px;\"\u003e1\u003c\/td\u003e\n\u003ctd class=\"xl65\" style=\"border-top: none; border-left: none; overflow: hidden; padding-bottom: 2px; padding-top: 2px;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\"\u003e\n\u003ctd height=\"20\" class=\"xl65\" style=\"height: 15.0pt; border-top: none; overflow: hidden; padding-bottom: 2px; padding-top: 2px;\"\u003em2 heat set inserts\u003c\/td\u003e\n\u003ctd class=\"xl65\" align=\"right\" style=\"border-top: none; border-left: none; overflow: hidden; padding-bottom: 2px; padding-top: 2px;\"\u003e12\u003c\/td\u003e\n\u003ctd class=\"xl65\" style=\"border-top: none; border-left: none; overflow: hidden; padding-bottom: 2px; padding-top: 2px;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\"\u003e\n\u003ctd height=\"20\" class=\"xl65\" style=\"height: 15.0pt; border-top: none; overflow: hidden; padding-bottom: 2px; padding-top: 2px;\"\u003em2 x 5mm screws\u003c\/td\u003e\n\u003ctd class=\"xl65\" align=\"right\" style=\"border-top: none; border-left: none; overflow: hidden; padding-bottom: 2px; padding-top: 2px;\"\u003e12\u003c\/td\u003e\n\u003ctd class=\"xl65\" style=\"border-top: none; border-left: none; overflow: hidden; padding-bottom: 2px; padding-top: 2px;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\"\u003e\n\u003ctd height=\"20\" class=\"xl65\" style=\"height: 15.0pt; border-top: none; overflow: hidden; padding-bottom: 2px; padding-top: 2px;\"\u003em3 heat set inserts\u003c\/td\u003e\n\u003ctd class=\"xl65\" align=\"right\" style=\"border-top: none; border-left: none; overflow: hidden; padding-bottom: 2px; padding-top: 2px;\"\u003e20\u003c\/td\u003e\n\u003ctd class=\"xl65\" style=\"border-top: none; border-left: none; overflow: hidden; padding-bottom: 2px; padding-top: 2px;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\"\u003e\n\u003ctd height=\"20\" class=\"xl65\" style=\"height: 15.0pt; border-top: none; overflow: hidden; padding-bottom: 2px; padding-top: 2px;\"\u003em3 square nuts\u003c\/td\u003e\n\u003ctd class=\"xl65\" align=\"right\" style=\"border-top: none; border-left: none; overflow: hidden; padding-bottom: 2px; padding-top: 2px;\"\u003e16\u003c\/td\u003e\n\u003ctd class=\"xl65\" style=\"border-top: none; border-left: none; overflow: hidden; padding-bottom: 2px; padding-top: 2px;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\"\u003e\n\u003ctd height=\"20\" class=\"xl65\" style=\"height: 15.0pt; border-top: none; overflow: hidden; padding-bottom: 2px; padding-top: 2px;\"\u003em3 x 10mm screws\u003c\/td\u003e\n\u003ctd class=\"xl65\" align=\"right\" style=\"border-top: none; border-left: none; overflow: hidden; padding-bottom: 2px; padding-top: 2px;\"\u003e10\u003c\/td\u003e\n\u003ctd class=\"xl65\" style=\"border-top: none; border-left: none; overflow: hidden; padding-bottom: 2px; padding-top: 2px;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\"\u003e\n\u003ctd height=\"20\" class=\"xl65\" style=\"height: 15.0pt; border-top: none; overflow: hidden; padding-bottom: 2px; padding-top: 2px;\"\u003em3 x 16mm screws\u003c\/td\u003e\n\u003ctd class=\"xl65\" align=\"right\" style=\"border-top: none; border-left: none; overflow: hidden; padding-bottom: 2px; padding-top: 2px;\"\u003e20\u003c\/td\u003e\n\u003ctd class=\"xl65\" style=\"border-top: none; border-left: none; overflow: hidden; padding-bottom: 2px; padding-top: 2px;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\"\u003e\n\u003ctd height=\"20\" class=\"xl65\" style=\"height: 15.0pt; border-top: none; overflow: hidden; padding-bottom: 2px; padding-top: 2px;\"\u003em3.5 roll pins\u003c\/td\u003e\n\u003ctd class=\"xl65\" align=\"right\" style=\"border-top: none; border-left: none; overflow: hidden; padding-bottom: 2px; padding-top: 2px;\"\u003e8\u003c\/td\u003e\n\u003ctd class=\"xl65\" style=\"border-top: none; border-left: none; overflow: hidden; padding-bottom: 2px; padding-top: 2px;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\"\u003e\n\u003ctd height=\"20\" class=\"xl65\" style=\"height: 15.0pt; border-top: none; overflow: hidden; padding-bottom: 2px; padding-top: 2px;\"\u003emolex picoblade 5 slot connectors with pins\u003c\/td\u003e\n\u003ctd class=\"xl65\" align=\"right\" style=\"border-top: none; border-left: none; overflow: hidden; padding-bottom: 2px; padding-top: 2px;\"\u003e4\u003c\/td\u003e\n\u003ctd class=\"xl65\" style=\"border-top: none; border-left: none; overflow: hidden; padding-bottom: 2px; padding-top: 2px;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\"\u003e\n\u003ctd height=\"20\" class=\"xl65\" style=\"height: 15.0pt; border-top: none; overflow: hidden; padding-bottom: 2px; padding-top: 2px;\"\u003etactile button switches\u003c\/td\u003e\n\u003ctd class=\"xl65\" align=\"right\" style=\"border-top: none; border-left: none; overflow: hidden; padding-bottom: 2px; padding-top: 2px;\"\u003e20\u003c\/td\u003e\n\u003ctd class=\"xl65\" style=\"border-top: none; border-left: none; overflow: hidden; padding-bottom: 2px; padding-top: 2px;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\"\u003e\n\u003ctd height=\"20\" class=\"xl65\" style=\"height: 15.0pt; border-top: none; overflow: hidden; padding-bottom: 2px; padding-top: 2px;\"\u003etorsion springs\u003c\/td\u003e\n\u003ctd class=\"xl65\" align=\"right\" style=\"border-top: none; border-left: none; overflow: hidden; padding-bottom: 2px; padding-top: 2px;\"\u003e4\u003c\/td\u003e\n\u003ctd class=\"xl65\" style=\"border-top: none; border-left: none; overflow: hidden; padding-bottom: 2px; padding-top: 2px;\"\u003e(2 of each size)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Dark Matter Mounts","offers":[{"title":"Default Title","offer_id":47363168796835,"sku":null,"price":42.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/2164\/9571\/files\/IMG_1771.jpg?v=1771891714"},{"product_id":"pistol-grip-for-novint-falcon-legacy-boards","title":"Pistol Grip for Novint Falcon - Legacy Boards","description":"\u003cp\u003eThis item is assorted parts needed to build your own custom pistol grip for the Novint Falcon.  It includes our take of the pistol grip that Novint used to sell (it re-uses the circuit boards from the knob grip that comes standard with a Falcon).  Circuit boards are not included, you will need to take apart your knob grip and use those boards.  Soldering is required to connect the tactile button switches from the pistol grip to the legacy circuit board.\u003cbr\u003e\u003c\/p\u003e\n\u003ctable border=\"0\" cellpadding=\"0\" cellspacing=\"0\" width=\"422\" style=\"border-collapse: collapse; width: 316pt;\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"279\" style=\"mso-width-source: userset; mso-width-alt: 10203; width: 209pt;\"\u003e \u003ccol width=\"43\" style=\"mso-width-source: userset; mso-width-alt: 1572; width: 32pt;\"\u003e \u003ccol width=\"100\" style=\"mso-width-source: userset; mso-width-alt: 3657; width: 75pt;\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\"\u003e\n\u003ctd height=\"20\" class=\"xl64\" width=\"279\" style=\"height: 15.0pt; width: 209pt;\"\u003eItem\u003c\/td\u003e\n\u003ctd class=\"xl64\" width=\"43\" style=\"border-left: none; width: 32pt;\"\u003eqty\u003c\/td\u003e\n\u003ctd class=\"xl64\" width=\"100\" style=\"border-left: none; width: 75pt;\"\u003eunit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\"\u003e\n\u003ctd height=\"20\" class=\"xl63\" style=\"height: 15.0pt; border-top: none;\"\u003e30awg solid core wires (6 colors)\u003c\/td\u003e\n\u003ctd class=\"xl63\" align=\"right\" style=\"border-top: none; border-left: none;\"\u003e3\u003c\/td\u003e\n\u003ctd class=\"xl63\" style=\"border-top: none; border-left: none;\"\u003eft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\"\u003e\n\u003ctd height=\"20\" class=\"xl63\" style=\"height: 15.0pt; border-top: none;\"\u003e3D printed pistol grip parts\u003c\/td\u003e\n\u003ctd class=\"xl63\" align=\"right\" style=\"border-top: none; border-left: none;\"\u003e1\u003c\/td\u003e\n\u003ctd class=\"xl63\" style=\"border-top: none; border-left: none;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\"\u003e\n\u003ctd height=\"20\" class=\"xl63\" style=\"height: 15.0pt; border-top: none;\"\u003em2 heat set inserts\u003c\/td\u003e\n\u003ctd class=\"xl63\" align=\"right\" style=\"border-top: none; border-left: none;\"\u003e7\u003c\/td\u003e\n\u003ctd class=\"xl63\" style=\"border-top: none; border-left: none;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\"\u003e\n\u003ctd height=\"20\" class=\"xl63\" style=\"height: 15.0pt; border-top: none;\"\u003em2 x 5mm screws\u003c\/td\u003e\n\u003ctd class=\"xl63\" align=\"right\" style=\"border-top: none; border-left: none;\"\u003e7\u003c\/td\u003e\n\u003ctd class=\"xl63\" style=\"border-top: none; border-left: none;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\"\u003e\n\u003ctd height=\"20\" class=\"xl63\" style=\"height: 15.0pt; border-top: none;\"\u003em3 heat set inserts\u003c\/td\u003e\n\u003ctd class=\"xl63\" align=\"right\" style=\"border-top: none; border-left: none;\"\u003e6\u003c\/td\u003e\n\u003ctd class=\"xl63\" style=\"border-top: none; border-left: none;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\"\u003e\n\u003ctd height=\"20\" class=\"xl63\" style=\"height: 15.0pt; border-top: none;\"\u003em3 square nuts\u003c\/td\u003e\n\u003ctd class=\"xl63\" align=\"right\" style=\"border-top: none; border-left: none;\"\u003e3\u003c\/td\u003e\n\u003ctd class=\"xl63\" style=\"border-top: none; border-left: none;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\"\u003e\n\u003ctd height=\"20\" class=\"xl63\" style=\"height: 15.0pt; border-top: none;\"\u003em3 x 10mm screws\u003c\/td\u003e\n\u003ctd class=\"xl63\" align=\"right\" style=\"border-top: none; border-left: none;\"\u003e1\u003c\/td\u003e\n\u003ctd class=\"xl63\" style=\"border-top: none; border-left: none;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\"\u003e\n\u003ctd height=\"20\" class=\"xl63\" style=\"height: 15.0pt; border-top: none;\"\u003em3 x 16mm screws\u003c\/td\u003e\n\u003ctd class=\"xl63\" align=\"right\" style=\"border-top: none; border-left: none;\"\u003e8\u003c\/td\u003e\n\u003ctd class=\"xl63\" style=\"border-top: none; border-left: none;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\"\u003e\n\u003ctd height=\"20\" class=\"xl63\" style=\"height: 15.0pt; border-top: none;\"\u003em3.5 roll pins\u003c\/td\u003e\n\u003ctd class=\"xl63\" align=\"right\" style=\"border-top: none; border-left: none;\"\u003e2\u003c\/td\u003e\n\u003ctd class=\"xl63\" style=\"border-top: none; border-left: none;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\"\u003e\n\u003ctd height=\"20\" class=\"xl63\" style=\"height: 15.0pt; border-top: none;\"\u003emolex picoblade 5 slot connectors with pins\u003c\/td\u003e\n\u003ctd class=\"xl63\" align=\"right\" style=\"border-top: none; border-left: none;\"\u003e2\u003c\/td\u003e\n\u003ctd class=\"xl63\" style=\"border-top: none; border-left: none;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\"\u003e\n\u003ctd height=\"20\" class=\"xl63\" style=\"height: 15.0pt; border-top: none;\"\u003etactile button switches\u003c\/td\u003e\n\u003ctd class=\"xl63\" align=\"right\" style=\"border-top: none; border-left: none;\"\u003e5\u003c\/td\u003e\n\u003ctd class=\"xl63\" style=\"border-top: none; border-left: none;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\"\u003e\n\u003ctd height=\"20\" class=\"xl63\" style=\"height: 15.0pt; border-top: none;\"\u003etorsion springs\u003c\/td\u003e\n\u003ctd class=\"xl63\" align=\"right\" style=\"border-top: none; border-left: none;\"\u003e2\u003c\/td\u003e\n\u003ctd class=\"xl63\" style=\"border-top: none; border-left: none;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Dark Matter Mounts","offers":[{"title":"Default Title","offer_id":47365887754403,"sku":null,"price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/2164\/9571\/files\/IMG_1771.jpg?v=1771891714"},{"product_id":"top-plate-with-mounting-hole-imperial-1020-extrusion","title":"Top Plate with Mounting Hole - Imperial 1020 Extrusion","description":"\u003cp\u003eThis product is a Top Plate for Imperial 1020 Aluminum Extrusion desk mount with a threaded hole for attaching a Phoenix kit.  The kit includes 1 top plate 6mm thick (1\/4\"-20 threaded hole included for Phoenix attachment) and 1\/4\"-20 screws for attaching the top plate to Imperial 1020 Extrusion.  \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eI am separating this out from our full mount for those that already have an Imperial 1020 Extrusion mount and just want to adapt it to work with the Phoenix.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eDesk clamp, Rail Guide and Phoenix attachments (shown in pictures) are sold separately based on your desk mounting preference.  \u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eOnly Black Powdercoat color is available at this time, but we plan to offer silver option in the future.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eIf you have purchased Predator Mounts or Foxx Mounts in the past, this is the correct size part to match your extrusion.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Dark Matter Mounts","offers":[{"title":"Black","offer_id":47615310594211,"sku":null,"price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/2164\/9571\/files\/1.jpg?v=1777577838"}],"url":"https:\/\/darkmattermounts.com\/collections\/featured-products.oembed?page=2","provider":"Dark Matter Mounts","version":"1.0","type":"link"}